12x20
Twinkle™ Heat Transfer Vinyl
The Shining, Silcone Star of the Show!
Wishing for a heat transfer vinyl like no other? Well you can thank your lucky stars because your wish was granted with Twinkle HTV! Twinkle’s silicone-like surface holds brilliant colors that appear to practically shine their own light when the glitter winks and wavers. The intense sparkle gives Twinkle a slight, but significant reflective quality. Every color of Twinkle is topped with a mesmerizing glossy glaze that feels fantastic. Whether it’s the lone focus or an incredible accent, Twinkle is your new show stopping heat transfer vinyl!
Twinkle is 225 Microns / 9 Mils and is a PU composition.
Cricut: Blade: Standard Setting: Glitter Iron-on
Silhouette 4: Blade: Auto-Blade, 3 Speed: 8 Force: 10
Brother ScanNCut: Blade: Auto-Blade Cut Speed: 1 Cut Pressure: 4 *Half Cut On
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier warm |
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium/firm pressure for 15 seconds
• Peel carrier warm |
